Cutting & Threading Tools
hand Taps
(BSP, BSPT, NPS, NPTF, NPSF)
Available from 1/8″ to 6″
hand Taps
(BSP, BSPT, NPS, NPTF, NPSF)
Available from 1/8″ to 6″
Machine Taps
Recommended for Working on tough & string materials, the taps have interrupted threads & are spiral pointed
Hand Taps
Available in serial and non-serial sets of any prescribed specification. Coarse pitch taps in set of 3 pieces. Fine pitch taps in set of 2 pcs. 1/8″ to 8″ 3mm to 205mm
Standard & Special as per Drawing
Available in MM/BSW/BSF/UNF/BSP/BA & Acme Threads OD- 13/16″ 1″, 1 5/16″, 1 ½”, 2″, 2¼”, 2 ½”, 3″,4″
Nut Taps
1/8″ to 8″ / 3mm to 205mm
3 Module with Ground Finish. Serration Cutters also manufactured to any pitch & included angle with ground finish.
From 1 Module to 24 Module, 50 DP to 1 DP Also chain Sprocket Hob as per drawing
These chasers are fitted within 1″,1 ½”, 2 ½” Capacity die head.
Suitable for 2½”, 4″, 6″ & 8″ Capacity Die Heads
Milling Cutter Sprocket
These thread rolls are used on Thread Rolling Machines. These Rolls comes in set of 2 pcs/3 pcs manufactured from D2 & M2 materials to suit any type of machine. For any specification of thread such as ISO, DIN, Whiteworth, American, Trapezoidal, Acme etc.
Suitable for ½”, ¾”, 1″, 1¼” , 1½”, 2″, and 3″ D.H. In BSW, BSP, UNC, UNF, MM, NPT, NGT, BSCY, Bs. Cond.& Special forms as per drawing.
Capacity ¼”, to 1″ ⅜”, to 1 ½,” to 2 ½,” & 1″ to 4″
Capacity 2½,” to 6″ & 4″, to 8″
Suitable for 2½”, 4″, 6″ & 8″ Capacity Die Heads
1½,” to 8″, 38mm to 200mm
1½,” to 8″, 38mm to 200mm
¼”, to 1¼”, 6mm to 32mm
Milling Cutter Sprocket
